Sony display User Manual

6

This monitor works with platforms running at horizontal 
frequencies between 30 and 121 kHz.

With the monitor and computer switched off, connect the video 
signal cable to the video input connector of the monitor and to the 
video output of the computer.

• Do not touch the pins of the video signal cable connector as this might 

bend the pins.

• When connecting the video signal cable, check the alignment of the 

HD15 connector. Do not force the connector in the wrong way or the 
pins might bend.

With the monitor and computer switched off, first connect the 
proper power cord for your local power supply to the monitor, 
then connect it to a power outlet.

First turn on the monitor, then turn on the computer.

The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.

• Check that the monitor is correctly connected to the computer.
• If NO INPUT SIGNAL appears on the screen, follow the on-

screen messages (page 15). 

• If you are replacing an old monitor with this model and OUT 

OF SCAN RANGE appears on the screen, reconnect the old 
monitor. Then adjust the computer’s graphic board so that the 
horizontal frequency is between 30 – 121 kHz, and the vertical 
frequency is between 48 – 160 Hz.

For more information about the on-screen messages, see “Trouble 
symptoms and remedies” on page 16.

forward side

To a computer 
with an HD15 
video output

To a computer with an 
HD15 video output

rear side

forward side

rear side

to AC IN

to a power outlet

power cord