Sony DSX-S310BTX User Manual
50
Error displays/Messages
No sound is heard from the Bluetooth audio
device.
device.
The audio device is paused.
t Cancel pause of the audio device.
t Cancel pause of the audio device.
The sound skips during playback of a
Bluetooth audio device.
Bluetooth audio device.
• Reduce the distance between the unit and the
Bluetooth audio device.
• If the Bluetooth audio device is stored in a case
which interrupts the signal, remove the audio device
from the case while using.
from the case while using.
• Several Bluetooth devices or other devices which
emit radio waves are used nearby.
t Turn off the other devices.
t Reduce the distance from the other devices.
t Reduce the distance from the other devices.
• The playback sound stops momentarily when the
connection between this unit and the cellular phone is
being made. This is not a malfunction.
being made. This is not a malfunction.
The connected Bluetooth audio device cannot
be controlled.
be controlled.
Check that the connected Bluetooth audio device
supports AVRCP.
supports AVRCP.
Some functions do not work.
Check that the connecting device supports the
functions in question.
functions in question.
The name of the other party does not appear
when a call is received.
when a call is received.
• The other party is not stored in the phonebook.
t Store in the phonebook (page 35).
• The calling phone is not set to send the phone
number.
A call is answered unintentionally.
• The connecting phone is set to start a call
automatically.
• “Auto Answer” of this unit is set to “Short” or
“Long” (page 34).
Pairing failed due to time out.
Depending on the connecting device, the time limit for
pairing may be short. Try completing the pairing
within the time.
pairing may be short. Try completing the pairing
within the time.
Bluetooth function cannot operate.
Turn off the unit by pressing (SOURCE/OFF) for 2
seconds, then turn the unit on again.
seconds, then turn the unit on again.
No sound is output from the car speakers
during handsfree call.
during handsfree call.
If the sound is output from the cellular phone, set the
cellular phone to output the sound from the car
speakers.
cellular phone to output the sound from the car
speakers.
Pandora connection is not possible.
Shut down Pandora on the mobile device, and then
launch again.
launch again.
Busy now... Please try later
This unit is busy.
t After waiting a moment, try again.
t After waiting a moment, try again.
Checking
The unit is confirming the connection of a USB device.
t Wait until confirming the connection is finished.
t Wait until confirming the connection is finished.
Connection Failed
Accessing the phonebook was terminated from the
cellular phone.
t Access the phonebook in the cellular phone again.
cellular phone.
t Access the phonebook in the cellular phone again.
Device Inside
If you turn the ignition switch to the OFF position
without removing the USB device or iPod, “Device
Inside” will appear in the display.
without removing the USB device or iPod, “Device
Inside” will appear in the display.
Empty
• The call history is empty.
• The phonebook is empty.
• The phonebook is empty.
Error
• USB device was not automatically recognized.
t Reconnect it again.
• Phonebook content was changed while accessing the
t Reconnect it again.
• Phonebook content was changed while accessing the
cellular phone.
t Access the phonebook in the cellular phone again.
Failure (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to
t See the installation guide manual of this model to
check the connection.
Failure (Illuminates for about 1 second.)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t Be sure to receive the channel that you want to
radio channel into a preset failed.
t Be sure to receive the channel that you want to
store, then try it again.
HF Device is not available
A cellular phone is not connected.
t Connect to a cellular phone.
t Connect to a cellular phone.
Hubs Not Supported
USB hub is not supported on this unit.
Invalid channel file
A file in the music folder may have been edited
without using “Content Transfer.”
t Perform “SensMe™ Setup” for the USB device or
without using “Content Transfer.”
t Perform “SensMe™ Setup” for the USB device or
Walkman again. For details on “SensMe™ Setup”,
see page 22.
see page 22.
Local Seek +/–
The local seek mode is on during automatic tuning.
NO Device
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
NO Music
The USB device does not contain a music file.
t Connect a USB device with a music file in it.
t Connect a USB device with a music file in it.
NO Name
An album/artist/track name is not written in the track.