Sony dtc-690 User Manual
70
)
8
1
¡
$
›
•
¶
£
7
Program
Numbers
Numbers
Program numbers are the codes indicating
the selection order. (Page 58.)
There are two ways to write program
numbers:
• Writing automatically during recording
• Renumbering automatically during
the selection order. (Page 58.)
There are two ways to write program
numbers:
• Writing automatically during recording
• Renumbering automatically during
playback or in the stop mode
(Renumbering function)
(Renumbering function)
Writing Automatically during
Recording
Recording
When you proceed so that start IDs are
written automatically during recording, the
program numbers are also written.
written automatically during recording, the
program numbers are also written.
Writing program numbers from the
beginning of the tape
beginning of the tape
1
Make sure that the AUTO indicator
is lit. If it is not lit, press the
START ID AUTO button.
is lit. If it is not lit, press the
START ID AUTO button.
When turning on the power and
inserting a cassette with its safety tab
at the record-possible position, the
AUTO indicator lights. In timer
recording, the AUTO indicator will be
the same as the one before the power
is turned off.
inserting a cassette with its safety tab
at the record-possible position, the
AUTO indicator lights. In timer
recording, the AUTO indicator will be
the same as the one before the power
is turned off.
2
To start recording, press the
¶
¶
¶
¶
¶
REC
button, then press the
8
8
8
8
8
PAUSE or
3
3
3
3
3
(play) button.
The program numbers will be written
in numerical order from “1” at the
same position as the start IDs.
The START ID indicator flashes while
the start ID is written for about 9
seconds (18 seconds in the long-play
mode).
in numerical order from “1” at the
same position as the start IDs.
The START ID indicator flashes while
the start ID is written for about 9
seconds (18 seconds in the long-play
mode).
1
2
2
¶
REC
8
PAUSE
3
\
1
2
AUTO
START ID