Sony dvp-ns33 User Manual

Page of 80
25
Playing Discs
Playing Discs
Playing Discs 
 
 
 
 
 
Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your 
TV so that the signal from the 
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel so that you 
can hear sound from the player.
4
Press A on the player, and place a 
disc on the disc tray.
5
Press H.
The disc tray closes. The player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
Depending on the disc, a menu may 
appear on the TV screen. For DVD 
VIDEOs, see page 28. For VIDEO CDs, 
see page 29.
To turn off the player
Press [/1. The player enters standby mode.
z
Hint
You can have the player turn off automatically 
whenever you leave it in stop mode for more than 
30 minutes. To turn this function on or off, set 
“AUTO POWER OFF” in “CUSTOM SETUP” to 
“ON” or “OFF” (
.
Notes on playing DTS sound tracks on a 
DVD VIDEO
• DTS audio signals are output only through the 
DIGITAL OUT (COAXIAL or OPTICAL*) jack.
• When you play a DVD VIDEO with DTS sound 
tracks, set “DTS” to “ON” in “AUDIO SETUP” 
(page 70).
• If you connect the player to audio equipment 
without a DTS decoder, do not set “DTS” to “ON” 
in “AUDIO SETUP” (page 70). A loud noise may 
come out from the speakers, affecting your ears or 
causing the speakers to be damaged.
* DVP-NS52P only
Note
Discs created on DVD recorders must be correctly 
finalized before they can be played. For more 
information about finalizing, refer to the operating 
instructions supplied with the DVD recorder.
ENTER
RETURN
Playback side facing down