Sony dvp-ns33 User Manual

Page of 80
27
Playing Discs
Resuming Playback from 
the Point Where You 
Stopped the Disc 
(Resume 
Play/Multi-disc Resume)
The player remembers the point where you 
stopped the disc.
Resuming playback for the 
current disc (Resume Play)
 
 
 
 
The player remembers the point where you 
stopped the disc even if the player enters 
standby mode by pressing [/1.
1
While playing a disc, press x to stop 
playback.
“RESUME” appears on the front panel 
display.
2
Press H.
The player starts playback from the point 
where you stopped the disc in Step 1.
z
Hint
To play from the beginning of the disc, press x 
twice, then press H.
Note
• The resume playback point for the current disc is 
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the mains lead (CD or DATA CD/
DATA DVD only).
• When playing a DVD-RW in VR mode, the point 
where you stopped is cleared when the disc tray is 
opened or the mains lead is disconnected.
• When playing a CD, the point where you stopped 
is cleared when the disc tray is opened or the 
mains lead is disconnected.
• When playing a DATA CD, the point where you 
stopped is cleared when the player enters standby 
mode, the disc tray is opened, or the mains lead is 
disconnected.
• This function may not work with some discs.
• Resume Play does not work during Shuffle Play 
and Programme Play.
Storing the point where you 
stopped the disc (Multi-disc 
Resume) (DVP-NS33/NS52P only) 
 
The player stores the point where you stopped 
the disc for up to 6 discs and resumes 
playback the next time you insert the same 
disc. When you store a resume playback point 
for the seventh disc, the resume playback 
point for the first disc is deleted.
z
Hints
• To play from the beginning of the disc, press x 
twice, then press H.
• To turn off the Multi-disc Resume function, set 
“MULTI-DISC RESUME” in “CUSTOM 
SETUP” to “OFF” (page 68). Playback restarts at 
the resume point only for the current disc in the 
player.
Notes
• “MULTI-DISC RESUME” in “CUSTOM 
SETUP” must be set to “ON” (default) for this 
function to work (page 67).
• The point where you stopped playing is cleared 
when:
– you change the play mode.
– you change the settings on the Setup Display.
• This function may not work with some discs.
• Resume Play does not work during Shuffle Play 
and Programme Play.
• If “MULTI-DISC RESUME” in “CUSTOM 
SETUP” is set to “ON” and you playback a 
recorded disc such as DVD-RW, the player may 
playback other recorded discs from the same 
resume point. To play from the beginning, press 
x twice and then press H.