Sony DXC-990 User Manual
DXC-990/990P
3-205-543-11 (1)
D:\Nouhin\DXC990UC\320554311DXC990UC\02GB-
DXC990UC\06INST.fm
DXC990UC\06INST.fm
masterpage:Left
GB
26
Installation
B
Installation and Connections
Installation
Only 1/2-inch bayonet-mount lenses can be
attached to the camera.
For 2/3-inch lenses, an LO-32BMT lens
mount adaptor (not supplied) is required.
attached to the camera.
For 2/3-inch lenses, an LO-32BMT lens
mount adaptor (not supplied) is required.
After mounting the lens, be sure to attach the
supplied lens mount stopper to prevent the
lens from getting loose.
supplied lens mount stopper to prevent the
lens from getting loose.
1
Turn the mount lever
counterclockwise as far as it goes.
counterclockwise as far as it goes.
(If the lens mount cap is in place, remove
it.)
it.)
2
Align the positioning pin on the lens
with the matching hole in the lens
mount and attach the lens (not
supplied).
with the matching hole in the lens
mount and attach the lens (not
supplied).
3
Turn the mount lever clockwise as far
as it goes to lock the lens in the lens
mount.
as it goes to lock the lens in the lens
mount.
4
Attach the supplied lens mount
stopper to the boss on the camera.
stopper to the boss on the camera.
5
Connect the lens cable to the LENS
connector on the camera.
connector on the camera.
(This step is not necessary for 1/2-inch
lenses.)
lenses.)
Mounting the Lens
Note
Lens mount
Lens mount stopper