Sony gdm-3001pt User Manual

12

You can adjust convergence settings to eliminate red or blue
shadows that may appear around objects on the screen.
Adjust the CANCEL MOIRE function to eliminate wavy or
elliptical patterns that may appear on the screen.
Once CANCEL MOIRE is adjusted, it will be stored in
memory for the current input signal. All other adjustments
will be stored in memory for all input signals received.

The MENU OSD appears.

Press the ¨./> and >?// buttons to select “
SCREEN,” and press the 

The SCREEN OSD appears.

Press the ¨./> buttons to select the item you want
to adjust.

 

H CONVERGENCE

 

V CONVERGENCE

 

V CONVER TOP

 

V CONVER BOTTOM

adjust the horizontal convergence

adjust the vertical convergence

adjust the screen’s upper vertical
convergence

adjust the screen’s lower vertical
convergence

COLOR

6500K

9300K

G  B I AS

50

B  B I AS

50

R  GAIN

50

G  GAIN

50

B  GAIN

50

R  B I AS

76

1

Fine tuning the color temperature
Press the ¨./> buttons to select an item and adjust by
pressing the >?// buttons.

Select R (red), G (green), or B (blue) BIAS to adjust the
black level of each color’s signal.

Select R (red), G (green), or B (blue) GAIN to adjust the
white level of each color’s signal.

The “5000K,” “6500K” or “9300K” disappears and the
new color settings are memorized for each of the three
color modes.
The color temperature modes change as follows:
5000Kn 1, 6500Kn 2, 9300Kn 3

The OSD automatically disappears after about 30 seconds.
To close the OSD, press the 

 button again.

To reset,  press the ? (reset) button while the OSD is on.
The selected item is reset to the factory settings.

SCREEN

TOP
BOT

H   CONVERGENCE

26