Sony gdm-3001pt User Manual

6

By pressing the 

 button, the size and centering of the

picture are automatically adjusted to fit the screen.

The picture is adjusted to fit the center of the screen.

Notes

• This function is intended for use with a computer running

graphic user interface software that provides a full-screen
picture.  It may not work properly if the background color is
dark or if the input picture does not fill the screen to the edges.

• The screen may go blank for a few seconds while performing the

auto-sizing function. This is not a malfunction.

• Although the signals for picture aspect ratio 5:4 (resolution: 1280

×

 1024) do not fill the screen to the edges, the picture is

accurately displayed.

If you need to change the OSD language, see “Using the
LANG (Language) On-screen Display” on page 16.
The default setting is English.

This monitor works with platforms running at horizontal
frequencies between 30 and 94 kHz.

With the computer switched off, connect the video signal
cable to the video output of the computer.

Note

Do not short the pins of the video signal cable.

With the monitor switched off, connect one end of the
proper power cord for your local supply to the monitor and
the other end to a power outlet.

The installation of your monitor is complete.

Note

If “OUT OF SCAN RANGE” or “NO INPUT SIGNAL” appears on
the screen, see “Warning Messages” on page 18.