Sony HKJ-101 User Manual

1-3 (E)

HKJ-101

1.

Remove the six M3 case stopper screws.

2.

Remove the rear panel.
n
Store the removed rear panel in a safe place so as not
to lose it.

3.

Pull out the SDI-80 assembly from the second slot
from the bottom of the J-H3 in the direction of the
arrow.

Rear panel

M3 case stopper screws

M3 case stopper
screws

4.

Insert the connector (CN601) on the DV-29 board into
the connector (CN41) on the SDI-80 assembly.
n
First, insert the connector (CN401) on the DV-29
board to the hole for i.LINK connector on the IF panel.
Then insert connector (CN601) to the connector on the
CN-2478 board.

5.

Fix the DV-29 board to the IF panel and to the SDI-80
assembly using the supplied screws (PWH2 

x 5 : 2

screws, PSW2.6 

x 5 : 3 screws).

n
When tightening the screws, tighten the screws PWH2
x 5 first of all screws.

6.

Insert the SDI-80 assembly to the original slot.

7.

Strongly push the connector panel both from the right
and the left sides of the SDI-80 assembly so that the
connector on the SDI-80 assembly is securely inserted
into the connector on the MB-993 board.

DV-29 board

SDI-80 assembly

PSW2.6 

x 5

PSW2.6 

x 5

PWH2 

x 5

IF panel

CN601

CN41

CN401

SDI-80 assembly

SDI-80 assembly