Sony HT-SF1300 User Manual

V/v repeatedly to select 

Select “SAVE” in step 2.
The measurement results are saved. 

Try the remedies and perform the Auto 
Calibration again.

Record down the error code.

Press 

, “RETRY Y” appears on the 

display.

Rectify the error.

 

For details, see “When error codes appear” 
above.

Press 

 to perform Auto Calibration again.

RETRY

Performs the Auto 
Calibration again.

SAVE Saves 

the 

measurement 

results and exits the setting 
process.

WARN CHK

Displays warning 
concerning the 
measurement results. See 
“When you select “WARN 
CHK”” (page 27).

PHASE

Displays the phase of each 
speaker (in phase/out of 
phase). See “When you 
select “PHASE”” (page 27).

DISTANCE

Displays the measurement 
result for speaker distance.

LEVEL

Displays the measurement 
result for speaker level.

EXIT

Exits the setting process 
without saving the 
measurement results.

ERROR 32

None of the speakers were 
detected. Make sure that the 
optimizer microphone is 
connected properly and perform 
the Auto Calibration again.
If the optimizer microphone is 
connected properly but the error 
code appears, the optimizer 
microphone cable may be 
damaged or improperly connected.

ERROR F 33

• None of the front speakers are 

connected or only one front 
speaker is connected.

• The optimizer microphone is not 

connected.

ERROR SR 33 Either the left or right surround 

speakers is not connected.

ERROR SW 33 Subwoofer is not connected. 

Connect the subwoofer to the 
SUBWOOFER terminal.

ERROR 33

Wrong speaker detection due to 
noise. Make sure the environment 
is quiet during Auto Calibration.

ERROR 35

A sound similar to the beep sound 
from the speakers while 
performing Auto Calibration is 
detected. Perform the Auto 
Calibration again.