Sony HTSS380 User Manual

The table below provides measurement 
status shown on the display panel.

The Auto Calibration function will be 
canceled when you perform the following 
during the measurement process:
– Press ?/1 or MUTING.
– Press input buttons on the remote control or 

INPUT +/– on the receiver.

– Change the volume level.

When the measurement process is 
completed, the result appears on the 
display panel with a beep sound.

Press 

V/v repeatedly to select the item, 

then press 

.

• EXIT

 

Exits the setting process without saving 
the measurement results.

• WARN CHECK

 

Displays warning related to the 
measurement results. See “Checking the 
warning message” (page 27).

• SAVE EXIT

 

Saves the measurement results and exits 
the setting process.

• RETRY

 

Performs the Auto Calibration again. 

Select “SAVE EXIT” in step 2.
“COMPLETE” appears on the display 
panel and the measurement results are 
saved.

If you reposition your speaker, we recommend that 
you perform Auto Calibration again to enjoy the 
surround sound.

Speaker existance

TONE

Speaker gain, distance, 
frequency response

T S P

Subwoofer gain and 
distance

WOOFER

Completes properly 

 

[SAVE EXIT]

Proceed to step 
2.

Fails 

 

[E - xxx xx]

See “When error 
codes appear” 
(page 27).