Sony HT-SF800M User Manual

Page of 44
Gettin
g
 Star
ted
masterpage:Right
lename[E:\SEM_Janet\Revision_SF800M\J9050000_2592136121SF800M_GB\2592136121\G
B03CON_HT-SF800M-CEL.fm]
13
GB
model name [HT-SS600/HT-SF800M]
[2-592-136-12(1)]
Tips
• Since the subwoofer does not emit highly directional 
signals, you can place it wherever you want.
• (Except for HT-SF800M) For greater flexibility in 
the positioning of the speakers, use the optional
WS-FV11 or WS-FV10D floor stand (available only 
in certain countries).
Attaching foot pads
(Except for HT-SF800M)
To prevent speaker vibration or movement, 
attach the supplied foot pads to the speaker as 
shown in the illustration below.
Note
Be sure to attach the supplied foot pads to the 
subwoofer as well.
Installing the speakers on the 
wall
You can install your front and surround speakers 
on the wall.
1
Prepare screws (not supplied) that are 
suitable for the hole on the back of 
each speaker. See the illustrations 
below.
2
Fasten the screws to the wall. The 
screws should protrude 5 to 7 mm.
3
Hang the speakers on the screws.
Notes
• Use screws that are suitable for the wall material and 
strength. As a plaster board wall is especially fragile, 
attach the screws securely to a beam and fasten them 
to the wall. Install the speakers on a vertical and flat 
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall 
material or screws to be used.
• Sony is not responsible for accident or damage 
caused by improper installation, insufficient wall 
strength or improper screw installation, natural 
calamity, etc. 
more than 4 mm
more than 25 mm
Hole on the back of the speaker
4.6 mm
10 mm
5 to 7 mm
4.6 mm
10 mm
Hole on the back of the speaker
continued
GB01COV_HT-SF800M-CEL.book  Page 13  Monday, March 28, 2005  4:03 PM