Sony HT-SF800M User Manual

masterpage:Left

lename[E:\SEM_Janet\Revision_SF800M\J9050000_2592136121SF800M_GB\2592136121\G

B03CON_HT-SF800M-CEL.fm]

model name [HT-SS600/HT-SF800M]

 [2-592-136-12(1)]

If you want to change the speaker cord, you can 
detach the supplied speaker cord from the 
connector.

Make sure that the catcher is facing the flat 
surface.

Make sure that the speaker cord is inserted 
according to its polarity : + to + and – to –. 
Otherwise the sound will be distorted and 
will lack bass.

To avoid the speaker cord from coming off the speaker 
connector

– do not use a smaller-size speaker cord. We 

recommend that you use the AWG#18 to AWG#24 
speaker cords.

– use the same speaker cord size for all the speaker 

connectors.

– twist the stripped ends of the speaker cords.

– insert the speaker cord completely into the speaker 

connector.

Connect the AC power cord to a wall outlet.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure.
This procedure can also be used to return 
settings you have made to their factory defaults. 
Use the buttons on the receiver for the operation.

Press ?/1 to turn off the receiver.

Hold down ?/1 for 5 seconds.

“INITIAL” appears in the display.
The following are reset to their factory 
settings.
• All settings in the SET UP, LEVEL and 

TONE menus.

• The sound field memorized for each 

input and preset station.

• All sound field parameters.
• All preset stations.
• MASTER VOLUME is set to “VOL 

MIN”.

catcher

+

–

(+)

(–)

To a wall outlet

AC power cord

GB01COV_HT-SF800M-CEL.book  Page 14  Monday, March 28, 2005  4:03 PM