Sony ipela nsr series User Manual

Page of 186
103
Chapter 5  Settings
• If a common value cannot be set for multiple cameras, the setting item 
deactivated so it cannot be modified. Change the combination of selected 
cameras and try setting the value again.
The following section describes the settings in detail. 
[Update Generic Camera Information] button
Retrieve the information from the camera.
Note
If the camera firmware was updated or other camera information has changed, 
click [Update Generic Camera Information] to retrieve information data from 
the camera again. In this case, control range settings may automatically change. 
Be sure to check all items again, to verify that all settings appropriate.
[Select Generic Camera Functions] button
Clicking this button brings up the screen (page 108) for choosing a function 
combination for Generic Camera.
[Add Channel] button
Add the camera settings for other channels.
Name
• When configuring one camera, enter the camera name.
Use only alphanumeric characters, underscores (_), and hyphens (-).
• When configuring multiple cameras simultaneously, the camera names are 
shown separated by commas (camera names cannot be edited).
Model
Displays the camera model name.
When configuring multiple cameras simultaneously, the camera model names 
are shown separated by commas.
User
Enter the name of the camera’s administrator in 16 alphanumerical characters or 
less.
Password
Enter the camera’s administrator password in 16 alphanumerical characters or 
less.