Sony ipela nsr series User Manual
35
Chapter 2 Initial Configuring the System
27
Configure each item below, and then click [Accept].
Enable
Select this check box when you use a UPS.
If you select this check box, select your UPS from the list.
Select this check box when you use a UPS.
If you select this check box, select your UPS from the list.
Disable
Select this check box when you do not use a UPS.
Select this check box when you do not use a UPS.
Power off In XXX Seconds
Enter the time before shutting down the unit after a power interruption is
detected.
Enter the time before shutting down the unit after a power interruption is
detected.
28
When the settings are complete, click [Quit].
The completed system settings are saved to DiskOnModule (DOM).
While the settings are being saved, a progress bar appears. When the process
is complete, [OK] is enabled.
While the settings are being saved, a progress bar appears. When the process
is complete, [OK] is enabled.
Caution
If the network settings have been modified, a network restart is performed.
Be aware that during this period recording may not be possible for several
seconds.
Be aware that during this period recording may not be possible for several
seconds.
29
Click [Reboot] in the System Menu to restart the NSR manually.