Sony kdl-w40a11e User Manual

 GB

Automatically changes the screen format according to the broadcast signal.

Press OK to select “Auto Format”.

Press 

M/m to select “On”, then press OK.

To keep your setting, select “Off”.

• Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of 

the screen by pressing 

 repeatedly.

• “Auto Format” is available for PAL and SECAM signals only.

For details about the screen format, see page 17.

Press OK to select “Screen Format”.

Press 

M/m to select “Smart”, “4:3”, “14:9”, “Zoom” or “Wide” (see page 

17 for details), then press OK.

Adjusts the position of the picture for each screen format.

Press OK to select “Screen Shift”.

Press 

M/m to select one of the following, then press OK.

V Shift: Adjusts the vertical picture position.
H Shift: Adjusts the horizontal picture position.
Reset: Resets to the factory settings. Instead of step 3, press 

M/m to select “OK”, then 

press OK.

Press 

M/m (for vertical picture position) or </, (for horizontal picture 

position), then press OK.

When “Screen Format” is set to “4:3” or “Wide”, “V Shift” cannot be adjusted.

You can select the options listed below on the Screen 
Control menu. To select options, see “Navigating 
through menus” (page 21).