Sony MDS-JB980 User Manual
44
GB
Assigning a character
If your keyboard layout does not match the
system settings, the display may show the
wrong characters or no characters at all when
you press the keys. In this case, you need to
assign characters to the keys.
system settings, the display may show the
wrong characters or no characters at all when
you press the keys. In this case, you need to
assign characters to the keys.
1
While the deck is stopped, press [Esc].
2
Press [F10]/[F11] repeatedly until
“Setup?” appears, then press [F12].
“Setup?” appears, then press [F12].
3
Press [F10]/[F11] repeatedly until
“Keyboard?” appears, then press [F12].
“Keyboard?” appears, then press [F12].
4
Press [F10]/[F11] repeatedly until
“Assign?” appears, then press [F12].
“Assign?” appears, then press [F12].
5
Press [F10]/[F11] repeatedly until the
character you want to assign appears.
character you want to assign appears.
If the character has already been assigned,
“User” appears. If it has not been assigned,
“Default” appears.
“User” appears. If it has not been assigned,
“Default” appears.
6
Press [F12].
“<Set Key>” flashes in the display.
7
Press the key to be assigned to on the
keyboard.
keyboard.
“Key Change” appears, and the selected
character is assigned to the key.
character is assigned to the key.
If “Same Key” appears
The same character is already assigned to
the key.
the key.
If “Remove old assign?” appears
A different character is already assigned to
the key. Press [F12] to clear the current
assignment and assign the new character.
Press [Esc] to cancel.
the key. Press [F12] to clear the current
assignment and assign the new character.
Press [Esc] to cancel.
8
Press [Esc] to complete the operation.
Notes
•
You can assign a character using [Shift] only for
symbol and number keys.
symbol and number keys.
•
You cannot assign a character to the following keys:
[Esc], [F1] – [F12], [Back Space], [Tab], [Caps
Lock], [Enter], [Shift], [Ctrl], [Alt], [Windows],
[Space], [Application], [Print Screen], [Scroll
Lock], [Pause], [Insert], [Delete], [Home], [End],
[Page Up], [Page Down], [Num Lock], [
[Esc], [F1] – [F12], [Back Space], [Tab], [Caps
Lock], [Enter], [Shift], [Ctrl], [Alt], [Windows],
[Space], [Application], [Print Screen], [Scroll
Lock], [Pause], [Insert], [Delete], [Home], [End],
[Page Up], [Page Down], [Num Lock], [
T], [t],
[
R], [r], and [/], [*], [–], [+] (of the numeric keypads)
•
“Key Change” does not appear in step 7 above if you
try to assign a character to one of the keys listed
above or other keys for which input is not accepted.
try to assign a character to one of the keys listed
above or other keys for which input is not accepted.
Clearing key assignments
You can clear key assignments one at a time or
all at once.
all at once.
To clear a key assignment
1
2
Press [F10]/[F11] repeatedly until the
character you want to clear appears,
then press [F12].
character you want to clear appears,
then press [F12].
“<Set Key>” flashes in the display.
3
Press [Delete].
“Key Clear” appears and the key assignment
is cleared.
is cleared.
To clear all key assignments
1
2
Press [Ctrl], [Alt], and [Delete]
simultaneously.
simultaneously.
“All Reset?” appears in the display.
3
Press [F12].
“Complete!” appears, and all assignments
are cleared.
are cleared.
To cancel the operation
Press [Esc].
Assigning characters to
keyboard keys
keyboard keys