Sony mds-pc1 User Manual

Recording on MDs

Notes

• When you turn off the Smart Space Function, the Auto Cut

Function is also turned off automatically.

• The Smart Space Function and Auto Cut Function are

factory set to on.

• If you turn off the deck or disconnect the AC power cord,

the deck will recall the last setting (On or Off) of the Smart
Space and Auto Cut Functions the next time you turn on
the deck.

Playing back tracks just recorded

Do this procedure to immediately play back tracks that
have just been recorded.

Press

fl (or ·) immediately after stopping

recording.
Playback starts from the first track of the material just
recorded.

To play from the first track of the MD after
recording

1 Press

p again after stopping recording.

2 Press

fl (or ·).

Playback starts from the first track of the MD.

Recording Over Existing Tracks

Follow the procedure below to record over existing
material just as you would on an analog cassette tape.

Do Steps 1 to 5 in “Recording on an MD” on
page 8.

Turn AMS (or press

= or +) until the

number of the track to be recorded over appears.

To record from the start of the track, continue
from Step 6 in “Recording on an MD” on page 9.

While “TRACK” flashes in the display

The deck is recording over an existing track, and stops
flashing when it reaches the end of the recorded
portion.

To record from the middle of the track

1 After Step 2 above, press

fl (or ·) to start

playback.

2 Press

fl (or P) where you want to start recording.

3 Continue from Step 6 in “Recording on an MD” on

page 9.

Note

You cannot record from the middle of an existing track when
the “PROGRAM” or “SHUFFLE” is on.

)

= AMS +

=/+

)