Sony MEX-BT5000 User Manual

Tips
• Preset Dial also allows you to make a call by

pressing a number button twice after pressing
(CALL).

• On the “Dialed Calls,” “Received Calls” and “Preset

Dial” menus, you can make a call by pressing
(CALL) while the phone number is displayed.

Presetting the volume of ring tone
and talker’s voice

You can preset the volume level of the ring tone
and talker’s voice.

To adjust the ring tone:
Rotate the joystick while the phone is ringing.
“Ring Vol” appears and ring tone volume is set.

To adjust the talker’s voice:
Rotate the joystick during a call. “Talk Vol”
appears and the talker’s voice volume is set.

Sending DTMF (Dual Tone Multiple
Frequency) tones

You can send DTMF tones.
To send DTMF tones, use the joystick or press
the required number buttons (0 – 9, or

) on

the card remote commander during a call.

Receiving calls

When receiving a call, ring tone is output from
your car speakers.
For details on the settings for receiving a call and
during a call, see “Setting a handsfree device” on
page 17.

When receiving a call, press (CALL),
(MENU) or (Bluetooth).

The phone call starts.

To reject a call

Press (OFF).

Tips
• If you set “Auto Answer” to on, the phone call is

automatically started in the set time (page 17).

• If (CALL) is pressed during a call, the handsfree

function is deactivated, and the microphone and
speaker of the cellular phone are activated. In this
case, the Bluetooth connection may become
disconnected depending on the cellular phone.

Ending calls

Press (OFF).
When the call ends, talk time appears for a
few seconds.

Note
Even if the call is ended, the Bluetooth connection is
not canceled.

Using the Phonebook

Receiving phonebook data from a
cellular phone

1 Select “Phone Settings” from the Bluetooth

function menu.

2 Select “Receive PB.”

“Waiting…” appears.

3 Send the phonebook data by operating the

cellular phone.
“Data Receiving…” appears while receiving
the phonebook data.
“Complete” appears when receiving is
complete.

Note
To cancel the transfer of phonebook data, operate the
cellular phone. Transfer cannot be canceled from this
unit.

Storing the numbers from “Dialed
Calls” or “Received Calls”

1 Select “Dialed Calls” or “Received Calls”

from the CALL menu.

2 Select the phone number to store, then select

“Save.”
The “Contact Name” display appears.

3 Input a name.

Up to 20 characters can be input.

4 Select “Save?”

c “yes.”

Note
Up to 50 phone numbers can be stored in the
Phonebook. If you try to register more than 50
numbers, “Memory Full” appears.

Deleting from the phonebook

1 Select “Phonebook”

c “Contact List” from the

CALL menu.

2 Select the name to delete.

3 Select “Delete”

c “yes.”

To clear all phonebook data, select “Delete All”
in step 1. After clearing, confirm that all
phonebook data has been cleared properly.

Changing a name in the phonebook

1 Select “Phonebook”

c “Contact List” from the

CALL menu.

2 Select the name to change.

3 Select “Edit Name,” then input a new name.

(Bluetooth)

(MENU)

(CALL)