Sony MKS-2010 User Manual

Cha

p

te

r 6  
 Ad

v

a

nce

d Op

er

a

tio

ns

98

Advanced Effect Operations

Carry out the procedure in the previous section “To 
turn th crop function on” (see page 97).

In the Crop menu, press [Crop Trans].

A popup window appears.

Select one of the following, as required.

Cut: Cut mode. The crop is unchanged during the 

transition, and is released when the transition 
completes.

Last 5%: The crop is unchanged until the transition is 

95% complete, and is released during the 
remaining 5%.

Linear: The cropping is removed linearly through the 

whole course of the transition.

If you selected “Last 5%” in step 3, specify the dead 
zone of the transition by setting “Release Trans” to on 
or off.

Off: The transition completes when 95% of the 

specified transition duration has elapsed. The crop 
is released at the same time.

On: The last 30% of the specified transition duration 

is made a transition dead zone. The crop is 
released when 95% of the specified duration has 
elapsed.

This operation can only be carried out on M/E effects.
It is not supported for some patterns.

You can add beveled edges in light mode or color mode.
Light mode: Beveled edges are produced by varying the 

brightness at the edges of the video.

Color mode: Beveled edges are produced by adding color 

at the edges of the video.

Beveled edges are added to both channels of 2-channel 
effects. They cannot be added to individual channels.

Press the [BVLD EDGE] button in the Effect/Wipe 
control block, turning it on.
Or, in the Effect/Wipe >M/E Effect >Beveled Edge 
menu, turn [Beveled Edge] on.

Set the following parameter with knob 1.

a) 100 is 

1

/

2

 of the full-sized picture.

Press [Edge Mode], turning it on.

A popup window appears.

Press [Light] to select light mode, or [Color] to select 
color mode. (See the previous section “Light mode and 
color mode” )

1 (Width)

Width of beveled 
edges

0.00 to 100.00

 a)

Beveled edges in light mode

Beveled edges in color mode