Sony MKS-2017 User Manual

164

Other Settings

Ch
a

p

te

r 

9 

  Sys

te

m

 Set

tin
gs

Use the Date/Time menu to set the date and time used by 
the system.

From the top menu, select Setup/Diag >Maintenance 
>Date/Time.

The Date/Time menu appears. The status area shows 
the current date and time in the [Current] line, and the 
date and time to set in the [Set] line. Immediately after 
the menu appears, both lines contain the same date and 
time.

Press [Date].

Turn the knobs to change the date in the [Set] line.

Press [Time].

Turn the knobs to change the time in the [Set] line. 

Press [Set].

The date and time in the [Set] line appear in the 
[Current] line.

Use the Panel menu to make the following settings related 
to the control panel.
• Brightness of LCD backlights
• Screen saver
• Beep on and off
• Touch panel calibration
• Hard disk formatting (only after a failure)

From the top menu, select Setup/Diag >Maintenance 
>Panel.

The Panel menu appears. The status area shows the 
current settings of each item (except for calibration 
and HDD format).

Press the button corresponding to the item you want to 
set, and set as described in the following sections.

LCD Bright: Brightness of the LCD buttons in the 

Flexi Pad control block

Scrn Saver: Screen saver on and off
Touch Beep: On and off of beep sounds for touch 

panel menu operations

Calibration: Calibration of touch panel
HDD Format: Initialization of hard disk (only after 

failure)

To adjust the brightness of LCDs
Set by turning knob 1.

To make screen saver settings
Press [Scrn Saver], turning it on or off, to turn the screen 
saver on and off.
When the screen saver is on, turn knob 1 to set the time 
until it activates.

1 (Month)

Month

1 to 12

2 (Day)

Day

1 to 31

3 (Year)

Year

2004 to 2037

1 (Hour)

Hour

0 to 23

2 (Min)

Minute

0 to 59

3 (Sec)

Second

0 to 59

1 (Bright)

Brightness.

1 to 5

1 (Wait)

Time (minutes) until screen 
saver activates.

1 to 300