Sony MKS-2017 User Manual
166
Other Settings
Ch
a
a
p
te
r
9
Sys
te
m
Set
tin
gs
gs
Resetting the whole system
1
From the top menu, select Setup/Diag >System
>Initialize.
>Initialize.
The Initialize menu appears.
2
Press [Reset].
The popup window closes, and a confirmation
message appears, prompting whether or not to reset.
message appears, prompting whether or not to reset.
3
Press [Yes] in the dialog box.
This resets the system.
To cancel the reset
Press [No] in the dialog box.
Press [No] in the dialog box.
Initializing memory
1
Carry out step 1 in the previous item, “Resetting the
whole system.”
whole system.”
2
Press [All Clear].
The popup window closes, and a confirmation
message appears, prompting whether or not to carry
out the memory initialization.
message appears, prompting whether or not to carry
out the memory initialization.
3
Press [Yes] in the dialog box.
This initializes memory, and resets the system.
To cancel memory initialization
Press [No] in the dialog box.
Press [No] in the dialog box.
Input Signal Setup (Input/Output
Menu)
Menu)
Use the Input/Output menu to carry out setup relating to
processor primary input signals.
You can make the following settings.
Phase: Adjust the phase of the primary input signals.
Through mode: For each primary input, select whether
processor primary input signals.
You can make the following settings.
Phase: Adjust the phase of the primary input signals.
Through mode: For each primary input, select whether
the through mode is on or off. The through mode is a
mode in which the sync signal included in an output
signal is not replaced by an internally generated sync
signal, but is left unchanged.
signal is not replaced by an internally generated sync
signal, but is left unchanged.
Video process: Adjusts the input signal luminance and
hue.
Carrying out phase adjustments and
through mode setting
through mode setting
1
From the top menu, select Setup/Diag >Input/Output
>Input Adjust.
>Input Adjust.
The Input Adjust menu appears. The status area shows
the input number, signal phase, and through mode
setting.
the input number, signal phase, and through mode
setting.
2
Select the input number for which you want to make
the setting.
the setting.
• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knob.
a) Values 9 to 16 are only valid when the MKS-2110M (option) is
installed.
The selected input number appears in reverse video.
3
To adjust the phase, press [Input Phase], and turn the
knobs to adjust the parameters.
knobs to adjust the parameters.
4
To carry out the through mode setting, press [Thru
Mode], toggling it between Enable and Disable.
Mode], toggling it between Enable and Disable.
Enable: Enable the through mode.
Disable: Disable the through mode.
Disable: Disable the through mode.
Knob
Description
Setting
values
values
1 (Input)
Input number selection
1 to 16
a)
Knob
Description
Setting values
2 (Input Phase)
Phase
–16 to +16