Sony RM-VL700T User Manual
12
GB
4
Press ENT.
The Component button turns
off.
off.
If the Component Select button
flashes five times before turning
off, it means that the setup is
incomplete. Start over from Step 1.
flashes five times before turning
off, it means that the setup is
incomplete. Start over from Step 1.
5
Check if the code number
works by following the
instructions on page 10.
works by following the
instructions on page 10.
Notes
• If you don’t input anything into the
Commander within 20 seconds
between each step, the setup
procedure will be cancelled. To set the
code, start over from the beginning.
between each step, the setup
procedure will be cancelled. To set the
code, start over from the beginning.
• If you press any button other than
PROGR +/– and 1 while setting the
component code, all code numbers
will be lost, and the setup procedure
will be cancelled. Start over from the
beginning.
component code, all code numbers
will be lost, and the setup procedure
will be cancelled. Start over from the
beginning.
To cancel setup, press SET.
Setting a component code by
the Search function (continued)
the Search function (continued)
Example: To operate a video
cassette recorder
cassette recorder
1
Press the desired
Component Select button.
Component Select button.
The Component Select button
lights up when you press it,
and turns off when you release
it.
lights up when you press it,
and turns off when you release
it.
Operating Your
Components with the
Remote Commander
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 8).
component, make sure you set the
component code first (page 8).
1
2