Sony RDHGTK37IP User Manual

Page of 36
24
GB
Notes
• Total playing time for a USB device is not 
displayed.
• The following are not displayed correctly:
– elapsed playing time of an MP3 file 
encoded using VBR (variable bit rate).
– folder and file names that do not follow 
either the ISO9660 Level 1, Level 2 or 
Joliet in the expansion format.
• ID3 tag information for MP3 files is displayed 
when ID3 version 1 and version 2 tags are 
used (ID3 version 2 tag information display 
has priority when both ID3 version 1 and 
version 2 tags are used for a single MP3 file).
Using optional 
equipment
1
Press VOLUME – repeatedly 
until “VOL MIN” appears in the 
display panel.
2
Connect an optional equipment 
(page 11).
3
Press FUNCTION +/– repeatedly 
to select the DVD/PC function.
4
Start playing the connected 
equipment.
5
Press VOLUME + repeatedly to 
adjust the volume.
Note
The system may enter standby mode 
automatically if the volume level of the 
connected equipment is too low. Adjust the 
volume level of the equipment. To turn off 
automatic standby function, see “Setting/
Canceling the automatic standby function” 
(page 24).
Deactivating the 
buttons on the unit
(Child Lock)
You can deactivate the buttons on the unit 
(except "/1) for preventing 
misoperation, such as child mischief.
Hold down x on the unit for more 
than 5 seconds.
“CHILD” and “LOCK ON” appear in the 
display panel.
You can only operate the system using the 
buttons on the remote control.
To cancel, hold down x on the unit for 
more than 5 seconds until “CHILD” and 
“LOCK OFF” appear in the display panel.
Note
Child Lock function will be canceled when you 
disconnect the power cord.
Setting/Canceling the 
automatic standby 
function
This system is equipped with an 
automatic standby function. With this 
function, the system enters standby mode 
automatically in about 30 minutes when 
there is no operation or audio signal 
output.
By default, the automatic standby 
function is turned on.
1
Press OPTIONS.
2
Press /
 repeatedly to select 
“AutoSTBY”, then press 
.
3
Press /
 repeatedly to select 
“ON” or “OFF”.