Sony rdr-hxd710 User Manual

Should you experience a problem with 
this recorder, please refer to the trouble 
shooting section on page 104.
If you are unable to rectify the problem, 
contact the Sony Customer Information 
Centre on 

• You can check the signal strength 

and signal quality using the menu 
system of this recorder.
Page 90 explains how to display the 
main menu on screen, and page 93 
explains how to obtain the signal 
strength display.
The serial number and the model 
number are located on the rear of the 
recorder.

• This recorder is only designed for use 

in the United Kingdom.
Compliance with digital terrestrial 
TV broadcast standards in other 
countries is not guaranteed.

To prevent fire or shock hazard, do not 
expose the unit to rain or moisture.
To avoid electrical shock, do not open 
the cabinet. Refer servicing to qualified 
personnel only.
The mains lead must only be changed 
at a qualified service shop.

This appliance is classified as a 
CLASS 1 LASER product. The 
CLASS 1 LASER PRODUCT 
MARKING is located on the laser 
protective housing inisde the 
enclosure.

This symbol on the product or on its 
packaging indicates that this product 
shall not be treated as household waste. 
Instead it shall be handed over to the 
applicable collection point for the 
recycling of electrical and electronic 
equipment. By ensuring this product is 
disposed of correctly, you will help 
prevent potential negative 
consequences for the environment and 
human health, which could otherwise 
be caused by inappropriate waste 
handling of this product. The recycling 
of materials will help to conserve 
natural resources. For more detailed 
information about recycling of this 
product, please contact your local 
Civic Office, your household waste 
disposal service or the shop where you 
purchased the product.

The use of optical instruments with this 
product will increase eye hazard. As 
the laser beam used in this DVD 
recorder is harmful to eyes, do not 
attempt to disassemble the cabinet.
Refer servicing to qualified personnel 
only.

This label is located on the laser 
protective housing inside the 
enclosure.

Notice for customers in the 
United Kingdom and Republic of 
Ireland
A moulded plug complying with 
BS1363 is fitted to this equipment for 
your safety and convenience.
Should the fuse in the plug supplied 
need to be replaced, a 5 AMP fuse 
approved by ASTA or BSI to BS1362, 
(i.e., marked with 

 or 

 mark) 

must be used.
If the plug supplied with this 
equipment has a detachable fuse cover, 
be sure to attach the fuse cover after 
you change the fuse. Never use the 
plug without the fuse cover. If you 
should lose the fuse cover, please 
contact your nearest Sony service 
station.

• This unit operates on 220 – 240 V 

AC, 50/60 Hz. Check that the unit’s 
operating voltage is identical with 
your local power supply.

To prevent fire or shock hazard, do not 
place objects filled with liquids, such 
as vases, on the apparatus.

Date of purchase:

Serial number:

Model number:

Post code:

Detailed fault 
description:

Signal strength  
and signal  
quality: