Sony rdr-hx1010 User Manual

Page of 116
92
• Audio(HDMI)
Selects the type of audio signal output from the 
HDMI OUT jack.
b
Notes
• A loud noise (or no sound) will be output if you connect 
the recorder to a TV that is not compatible with 
DOLBY DIGITAL/DTS signals and “Auto” is 
selected. In this case, select “PCM.”
• Set “Digital Out” to “On” when outputting compressed 
audio signals to an HDMI compatible TV.
Recording and Parental 
Control Settings (Features)
The “Features” setup allows you to adjust 
recording and parental control settings.
1
Press SYSTEM MENU while the recorder is 
in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Features,” and press ENTER.
The “Features” setup appears with the 
following options. The default settings are 
underlined.
TV Direct Rec (HDD/DVD+RW/DVD-RW/
DVD+R/DVD-R only)
Auto Chapter
Selects whether to automatically divide a 
recording (a title) into chapters during recording 
or dubbing.
Auto
Normally, select this position. 
Outputs the optimum audio signal 
that can be received by the TV 
based on the “Digital Out” setting 
(page 91).
PCM
Converts Dolby Digital or 96 kHz 
PCM signals to 48 kHz/16 bit 
PCM.
On
Allows you to easily record what 
you are watching on the TV using 
SMARTLINK.
Off
Turns off the TV Direct Rec 
function.
On
For the HDD or a DVD-RW (VR 
mode), the recorder detects 
changes in the picture and sound 
and automatically inserts chapter 
marks.
For other recordable discs, the 
recorder inserts chapter marks at 
approximately 6-minute intervals.
Off
No chapter mark is inserted.
TV Direct Rec :
SETUP
Easy Setup
On
On
Record to HDD
Settings
Options
Features
Audio
Video
Screen Saver :
Colour System : 
HQ Setting :
Synchro Rec :
One Touch Dubbing
Parental Control
Auto Chapter :
On
PAL
HQ