Sony SNC-CH140 User Manual

Ot
her

s

Using the SNC toolbox

111

Select Device Setting or Firmware Upgrade.

Click Next.

For Device Setting:
Edit the value for the setting you wish to change.
See “Device Setting” on page 111 for changing the 
values.
Click Next to display the confirmation screen for 
setting change. Check to see if the setting is correct. 
If correction is needed, click Back to return to the 
previous screen to redo the setting.

For Firmware Upgrade:
Set the firmware for the device you want to 
upgrade.
See “Using the Firmware Upgrade” on page 109 for 
setting firmware.

Click Next.

Set the schedule.

Task name
Name the task.

Recurrence pattern
Specify the operation interval.
Onetime: Runs the task once.
Hourly: Specify the operation frequency in units of 
hours. (Possible set value: 1 to 99)
Daily: Specify the operation frequency in units of 
days. (Possible set value: 1 to 99)
Weekly: Specify the operation frequency in units 
of weeks and days of the week. (Possible set value: 
1 to 99)

Range of recurrence
Specify the starting date and time, and the end date 
and time.
Start: Set the starting date.
Execution time: Set the starting time.
No end date: This setting does not set an end date.
End after: Specify the number of times to execute 
the operation.
End by: Set the end date.

Click Next.
Check the setting when the final confirmation 
screen for task setting is displayed.
If correction is needed, click Back to return to the 
previous screen to redo the setting.

Click Finish.

You can configure advanced settings for a device on the 
Device Setting screen.
When you select a device(s) on the Device list and select 
Device Setting from the Tools menu, or when you right 
click on the device selection screen and click Device 
Setting in the displayed menu, the Device Setting screen 
is displayed.