Sony slv-se230g User Manual

20

Setting up the VCR with the Auto Set Up function

Before using the VCR for the first time, set up the VCR using the Auto Set Up 
function.  With this function, you can set the TV channels, guide channels for the 
VIDEO Plus+ system, and VCR clock automatically.

Press MENU.

If the picture does not appear clearly on the TV, change the RF channel on 
the VCR and TV.  Select INSTALLATION from the menu, then press 

M/m 

to highlight VCR OUTPUT CH and press 

,.  Select the RF channel by 

pressing the 

M/m buttons.  Then, tune the TV to the new RF channel so that 

a clear picture appears.

Turn on your TV and set it to the video channel.

If your TV does not have a Scart (EURO-AV) connector, tune the 
TV to channel 21 (the initial RF channel for this VCR).  Refer to 
your TV’s manual for TV tuning instructions.  If the picture does not 
appear clearly, see “To change the RF channel” on page 20.

Connect the mains lead to the mains.

The VCR automatically turns on, and the message for the Auto Set 
Up function appears.

Press OK.

The VCR starts searching for all of 
the receivable channels and presets 
them in the appropriate order for 
your local area.

If you want to change the order of 
the channels or disable unwanted 
programme positions, see 
“Changing/disabling programme 
positions” on page 27.

After the search or download is complete, the current time appears 
for any stations that transmit a time signal.  If the time does not 
appear, set the clock manually.  See “Setting the clock” on page 32.

OK

M E N U

:

P L E A S E   W A I T

A U T O   S E T   U P

4 0 %

E X I T