Sony STR-LV700R User Manual

Page of 100
Usin
g the
 rece
ive
r
masterpage:Right
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB07_STR-LV700-CEL.fm]
45
GB
 model name1[STR-LV700R]
 [4-249-847-12(1)]
 
By adjusting the LEVEL menu and TONE 
menu, you can customise the sound fields to suit 
your particular listening situation.
Note on the displayed 
parameters
Adjustable parameters vary depending on the 
selected sound field. If a parameter appears 
dimmed, it may not be available to the selected 
sound field or it may be impossible to change it.
Adjusting the LEVEL menu
You can adjust the balance and level of each 
speaker. These settings are applied to all sound 
fields.
1
Start playing a source encoded with 
multi-channel surround effects (DVD, 
etc.).
2
Press the black 
MAIN MENU
 button 
repeatedly until 
LEVEL
 appears on the 
display.
3
Press 
/
 to select the parameter.
4
While monitoring the sound, press 
/
 to adjust the selected parameter.
You can select any parameter except 
EFCT. The EFCT. parameter setting is 
stored independently for each sound field.
5
Repeat steps 3 and 4 to adjust the other 
parameters.
LEVEL menu parameters
x
BAL. XXX (Front speaker balance)
Initial setting: BALANCE
Lets you adjust the balance between the front left and 
right speakers. You can adjust in the range of L (+1 to 
+8), BALANCE (0), R (+1 to +8) in 17 steps.
CTR XXX dB
(Centre speaker level)
SUR.L. XXX dB
(Surround speaker (L) level)
SUR.R. XXX dB
(Surround speaker (R) level)
S.W. XXX dB
(Subwoofer level)
Initial setting: 0 dB
You can adjust this parameter from –10 dB to +10 dB 
in 1 dB steps.
x
 
COMP.
(Dynamic range compressor)
Lets you compress the dynamic range of the 
soundtrack. This may be useful when you want to 
watch movies at low volumes.
• OFF
The dynamic range is not compressed.
• STD
The dynamic range is compressed as intended by the 
recording engineer.
• MAX
The dynamic range is compressed dramatically.
Tip
The dynamic range compressor lets you compress the 
dynamic range of the soundtrack based on the dynamic 
range information included in the Dolby Digital signal. 
STD is the initial setting, but it only enacts light 
compression.
Therefore, we recommend using the MAX setting. 
This greatly compresses the dynamic range and lets 
you watch movies late at night at low volumes. Unlike 
analogue limiters, the levels are predetermined and 
provide a very natural compression.
Note
Dynamic range compression is possible with Dolby 
Digital sources only.
EFCT. XXX (Effect level)
Lets you adjust the size of the current surround 
effect. This parameter is displayed only when 
C.ST.EX AC.ST.EX BC.ST.EX C
CONCERTJAZZ, or HALL is selected.
• MIN
The surround effect decreases.
• STD
Normal surround effect is applied.
• MAX
The surround effect increases.
Customising sound fields
/
/
/
MAIN MENU
L
R
D.RANGE
continued