Sony STR-DH100 User Manual
15
GB
Getting Star
ted
If you connect a DVD player
• Be sure to change the factory setting of the
BD/DVD input button on the remote so that
you can use the button to control your DVD
player. For details, see “Changing button
assignments” (page 28).
you can use the button to control your DVD
player. For details, see “Changing button
assignments” (page 28).
• You can also rename the BD/DVD input so
that it can be displayed on the receiver’s
display. For details, see “Naming inputs”
(page 19).
display. For details, see “Naming inputs”
(page 19).
If you connect a DVD recorder
• Be sure to change the factory setting of the
VIDEO input button on the remote so that
you can use the button to control your DVD
recorder. For details, see “Changing button
assignments” (page 28).
you can use the button to control your DVD
recorder. For details, see “Changing button
assignments” (page 28).
• You can also rename the VIDEO input so
that it can be displayed on the receiver’s
display. For details, see “Naming inputs”
(page 19).
display. For details, see “Naming inputs”
(page 19).
Notes
• You can record the audio signals of the
components connected to this receiver. For
example, connect a recording component such as a
tape deck to the VIDEO AUDIO OUT jacks and
press the input buttons (DMPORT, BD/DVD,
SAT, SA-CD/CD, MD/TAPE, TUNER) to select
the component to be recorded.
example, connect a recording component such as a
tape deck to the VIDEO AUDIO OUT jacks and
press the input buttons (DMPORT, BD/DVD,
SAT, SA-CD/CD, MD/TAPE, TUNER) to select
the component to be recorded.
• Be sure to connect the video output of the video
component to the TV, so that the image is
displayed on the TV. However, you cannot do
video recording via this receiver. Refer to the
operating instructions of each connected
component for details.
displayed on the TV. However, you cannot do
video recording via this receiver. Refer to the
operating instructions of each connected
component for details.
Tip
To output the sound of the TV from the speakers
connected to the receiver, be sure to turn off the
TV’s volume or activate the TV’s muting function.
connected to the receiver, be sure to turn off the
TV’s volume or activate the TV’s muting function.
4: Connecting the
antennas (aerials)
antennas (aerials)
Connect the supplied AM loop antenna
(aerial) and FM wire antenna (aerial).
Before connecting the antennas, make sure to
disconnect the AC power cord (mains lead).
(aerial) and FM wire antenna (aerial).
Before connecting the antennas, make sure to
disconnect the AC power cord (mains lead).
* The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
components.
components.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
SAT
VIDEO
IN
IN
IN
IN
IN
OUT
OUT
L
R
L
R
L
R
ANTENNA
MD/TAPE
DMPORT
DC5V 0.7A MAX
SA-CD/CD
BD/DVD
AM
L
R
FM wire antenna (aerial) (supplied)
AM loop antenna (aerial)
(supplied)
(supplied)