Sony SVO-1330 User Manual

23 

(US)

The VCR outputs a signal from the WARNING OUT
terminal when something wrong has happened to the
VCR during recording:

– when the recording stops due to an entangled tape
– when the APC detects an improper video signal

level at the start of recording

– when an improper video signal level is detected by

the recording checking function

WARNING OUT terminal

GND terminal

Output
signal

Recording stops.

5 V

0 V

To reset, press one of the
tape operation buttons.

If you connect the EJECT IN/OUT terminals of the
VCRs, you can eject the tape inserted into all the
connected VCRs simultaneously in the following
cases:

– when you press 6 EJECT of VCR 1
– when you press the EJECT buttons on the RM-

V200 Remote Control Unit (not supplied)

– when you input a signal from an external switch

Connect the RM-V200 to the CONTROL S IN jack of
VCR 1, and connect the VCRs via the CONTROL S
IN and OUT jacks.

Connect the external switch between the EJECT IN
terminal and the GND terminal of VCR 1.

to EJECT OUT

to EJECT IN

to EJECT OUT

to EJECT IN

VCR 1

VCR 2

VCR 3