Sony SVO-1330 User Manual

28 

(US)

• Check that the clock is set.

• Make sure a tape has been inserted.

• Check that the safety tab has not been removed.

• Make sure the tape has been wound to the beginning.

• Make sure a program has been set for timer recording.

• Make sure your timer settings have not already passed the

current time.

• Make sure the KEY INHIBIT ON/OFF switch is set to OFF.

• Check that a tape isn’t already in the tape compartment.

• When a tape is inserted and the VCR is left in the stop mode with

the power turned on for about 5 minutes, the tape protection
mechanism is activated automatically and a mechanical noise is
heard.

• Clean the cabinet, panel and controls with a dry, soft cloth, or a

soft cloth slightly moistened with a mild detergent solution. Do not
use any type of solvent, such as alcohol or benzine.

If you have any questions or problems concerning your unit,
please consult your nearest Sony dealer.

The timer does not operate.

The desired operation cannot be
selected.

A tape cannot be inserted.

A mechanical noise is heard in the
stop mode.

The VCR needs to be cleaned.