Sony ta-va777es User Manual

2

Should any solid object or liquid fall into
the cabinet, unplug the amplifier and have
it checked by qualified personnel before
operating it any further.

• Before operating the amplifier, check that

the operating voltage is identical with
your local power supply.  The operating
voltage is indicated on the nameplate at
the rear of the amplifier.

• The unit is not disconnected from the AC

power source (mains) as long as it is
connected to the wall outlet, even if the
unit itself has been turned off.

• If you are not going to use the amplifier

for a long time, be sure to disconnect the
amplifier from the wall outlet.  To
disconnect the AC power cord, grasp the
plug itself;  never pull the cord.

• AC power cord must be changed only at

the qualified service shop.

• Place the amplifier in a location with

adequate ventilation to prevent heat
buildup and prolong the life of the
amplifier.

• Do not place the amplifier near heat

sources, or in a place subject to direct
sunlight, excessive dust or mechanical
shock.

• Do not place anything on top of the

cabinet that might block the ventilation
holes and cause malfunctions.

Before connecting other components, be
sure to turn off and unplug the amplifier.

Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a mild
detergent solution.  Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzine.

If you have any question or problem
concerning your amplifier, please
consult your nearest Sony dealer.