Sony VPL-PX11 User Manual
11
(GB)
Control Panel
1
HELP key
If you need help information during an operation,
press this key to display help messages. The Help
menu lists error recovery techniques depending on
problem type.
press this key to display help messages. The Help
menu lists error recovery techniques depending on
problem type.
2
VOLUME +/– keys
Adjust the volume of the built-in speakers.
+ : Increases the volume.
– : Decreases the volume.
– : Decreases the volume.
3
APA (Auto Pixel Alignment) key
Adjusts the picture to be projected automatically to
give the clearest picture possible while a signal from
the computer is input. Adjusts the shift (up/down and
left/right) at the same time automatically.
give the clearest picture possible while a signal from
the computer is input. Adjusts the shift (up/down and
left/right) at the same time automatically.
Note
Press the APA key when the full image is displayed
on the screen. If there are black edges around the
image, the APA function will not function properly
and the image may extend beyond the screen.
on the screen. If there are black edges around the
image, the APA function will not function properly
and the image may extend beyond the screen.
4
RESET key
Resets the value of an item to its factory preset value.
This key functions when the menu or a setting item is
displayed on the screen.
This key functions when the menu or a setting item is
displayed on the screen.
5
Arrow (
M/m/</,) keys
Used to select a menu or to make various adjustments.
6
ENTER key
Enters the settings of items in the menu system.
HELP
LAMP/
COVER
TEMP/
FAN
POWER
SAVING
ON/
STANDBY
RESET
APA
VOLUME
ENTER
INPUT
MENU
1
2
3 4 5 6 7 8
q;
9
Location and Function of Controls
7
INPUT key
Selects the input signal. Each time you press the key,
the input signal switches as follows:
the input signal switches as follows:
Note
The audio signals are the same for the VIDEO and
S-VIDEO.
S-VIDEO.
8
I
/ 1 (on / standby) key
Turns the projector on and off when the projector is in
the standby mode. The ON/STANDBY indicator
lights in green when the power is turned on.
When turning off the power, press the
the standby mode. The ON/STANDBY indicator
lights in green when the power is turned on.
When turning off the power, press the
I
/ 1 key
twice following the message on the screen, or press
and hold the key for about one second.
and hold the key for about one second.
For details on steps for turning off the power, see “To turn
off the power” on page 20 (GB).
off the power” on page 20 (GB).
9
MENU key
Displays the on-screen menu. Press again to clear the
menu.
menu.
0
Indicators
LAMP/COVER: Lights up or flashes under the
following conditions:
• Lights up when the lamp has reached the end of
• Lights up when the lamp has reached the end of
its life or has reached a high temperature.
• Flashes when the lamp cover or air filter cover
is not secured firmly.
TEMP (Temperature)/FAN: Lights up or flashes
under the following conditions:
• Lights up when temperature inside the projector
• Lights up when temperature inside the projector
becomes unusually high.
• Flashes when the fan is broken.
POWER SAVING:
Lights up when the projector is
in the power saving mode. When POWER
SAVING in the SET SETTING menu is set to
ON, the projector goes into the power saving
mode if no signal is input for 10 minutes.
Although the lamp goes out, the cooling fan
keeps running. The power saving mode is
canceled when a signal is input or any key is
pressed. However, in the power saving mode,
none of the keys function for the first 60 seconds.
SAVING in the SET SETTING menu is set to
ON, the projector goes into the power saving
mode if no signal is input for 10 minutes.
Although the lamp goes out, the cooling fan
keeps running. The power saving mode is
canceled when a signal is input or any key is
pressed. However, in the power saving mode,
none of the keys function for the first 60 seconds.
INPUT-A
S-VIDEO
VIDEO
INPUT-B