Sony VPL-PX11 User Manual
12
(GB)
Location and Function of Controls
ON/STANDBY: Lights up or flashes under the
following conditions:
• Lights up in red when the AC power cord is
• Lights up in red when the AC power cord is
plugged into the wall outlet. Once in the
standby mode, you can turn on the projector
with the
standby mode, you can turn on the projector
with the
I /
1 key.
Note
The built-in circuits provided for carrying out
the Off & Go function (page 8 (GB)) may keep
the cooling fan running for a while after the
ON/STANDBY indicator turns from green to
red just after you turn off the projector by
pressing the
the Off & Go function (page 8 (GB)) may keep
the cooling fan running for a while after the
ON/STANDBY indicator turns from green to
red just after you turn off the projector by
pressing the
I /
1 key.
• Lights up in green when the power is turned on.
• Flashes in green while the cooling fan runs after
• Flashes in green while the cooling fan runs after
the power is turned off with the
I /
1 key. The
fan runs for about 90 seconds after turning off
the power.
The ON/STANDBY indicator flashes quickly
for the first 60 seconds of that time.
During this first 60 seconds, you cannot turn the
power back on with the
the power.
The ON/STANDBY indicator flashes quickly
for the first 60 seconds of that time.
During this first 60 seconds, you cannot turn the
power back on with the
I /
1 key.
For details on the LAMP/COVER and the TEMP/FAN
indicators, see page 35 (GB).
indicators, see page 35 (GB).
Connector Panel
Left side
OUTPUT
REMOTE
VIDEO IN
INPUT B
INPUT A
AUDIO
USB
RGB
AUDIO
VIDEO
S VIDEO
~
AC IN
AUDIO
AUDIO
RGB
MONITOR
RS-232C
PUSH
5
6
4
3
2
1
1
AC IN socket
Connects the supplied AC power cord.
2
INPUT A connectors
Connect to external equipment such as a computer.
RGB connector (HD D-sub 15-pin, female):
Connects to the monitor output on a computer
using the supplied cable.
When inputting a component or 15k RGB signal,
use the appropriate cable.
using the supplied cable.
When inputting a component or 15k RGB signal,
use the appropriate cable.
For details, see “To connect 15k RGB/Component
equipment” on page 17 (GB).
equipment” on page 17 (GB).
AUDIO jack (stereo minijack): Connects to the
audio output of the computer.
USB connector (USB B-plug for upstream, 4-pin):
Connects to a computer. When you connect the
projector to the computer via this connector, the
projector recognizes that a USB mouse is
connected and you can control the mouse
function of the computer connected to the INPUT
A connector using the supplied Remote
Commander. The supplied application software
can be used on the computer connected to this
connector.
projector to the computer via this connector, the
projector recognizes that a USB mouse is
connected and you can control the mouse
function of the computer connected to the INPUT
A connector using the supplied Remote
Commander. The supplied application software
can be used on the computer connected to this
connector.