Sony VPL-CS20 User Manual

5

Location and Function of Controls

Ov
e

rv

ie

w

a ZOOM +/– key

Adjusts the picture size.

b INPUT key

c ?/1

 

Turns on the projector when the 
projector is in standby mode. The ON/
STANDBY indicator around the ?/1 key 
flashes in green until the projector is 
ready to operate.

d TILT adjustment key

Adjusts the tilt of the projector.
For details, see “Projecting” on 
page 11.

e ON/STANDBY indicator (located 

?

/1

 

Lights up or flashes under the following 
conditions:
– Lights in red when the AC power cord 

is plugged into a wall outlet. Once the 
projector is in standby mode, you can 
turn it on with the ?/1 key.

– Lights in green when the power is 

turned on, and when it is ready to 
operate.

– Flashes in green from the projector is 

turned on until the projector is ready to 
operate. Also, flashes in green while 
the cooling fan is running after the 
power is turned off with the ?/1 key. 
The fan runs for about 45 seconds after 
the power is turned off.

f FOCUS +/– key

Adjusts the picture focus manually.

g AUTO FOCUS key

Adjusts the picture focus automatically.

h Status indicators

Lights when the projector is in power 
saving mode.

Lights or flashes under the following 
conditions:
– Lights when the temperature inside 

the projector becomes unusually 
high.

– Flashes when the fan is broken.

Lights or flashes under the following 
conditions:
– Lights when the lamp has reached 

the end of its life or reaches a high 
temperature.

– Flashes when the lamp cover or air 

filter cover is not secured firmly.

i AUDIO/VIDEO connector

Connects to the audio output and video 
output, or S video output (Y/C video 
output) of the video equipment or the 
computer.

Open the cover to use the AUDIO/
VIDEO IN connector.

Push