Denon AVR-1312 User Manual

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.

ON/STANDBY

Turn off the power using

ON/STANDBY

Press

ON/STANDBY

while simultaneously pressing

and

Once the display starts flashing at intervals of about 1 second, release the two

buttons.

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

Specifications

n Audio section

• Power amplifier

Rated output:

Front:

75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)

110 W + 110 W (6 Ω, 1 kHz with 0.7 % T.H.D.)

Center:

75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)

110 W (6 Ω, 1 kHz with 0.7 % T.H.D.)

Surround:

75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)

110 W + 110 W (6 Ω, 1 kHz with 0.7 % T.H.D.)

Output connectors:

6 – 16 Ω

• Analog

Input sensitivity/Input impedance:

200 mV/47 kΩ

Frequency response:

10 Hz – 100 kHz — 0, –3 dB (DIRECT mode)

S/N:

98 dB (IHF–A weighted, DIRECT mode)

n Video section

• Standard video connectors

Input/output level and impedance:

1 Vp-p, 75 Ω

Frequency response:

5 Hz – 10 MHz — 0, –3 dB

n Tuner section

[FM]

[AM]

(Note: μV at 75 Ω, 0 dBf = 1 x 10

–15

Receiving Range:

87.5 MHz – 107.9 MHz

520 kHz – 1710 kHz

Usable Sensitivity:

1.2 μV (12.8 dBf)

18 μV

50 dB Quieting Sensitivity:

MONO

2.8 μV (20.2 dBf)

S/N (IHF-A):

MONO

70 dB

STEREO 67 dB

Total harmonic Distortion (at 1 kHz):

MONO

0.7 %

STEREO 1.0 %

n General

Power supply:

AC 120 V, 60 Hz

Power consumption:

330 W

0.5 W (Standby)

n Remote control unit (RC-1158)

Batteries:

R03/AAA Type (two batteries)

Maximum external dimensions:

1-31/32” (W) x 8-5/16” (H) x 55/64” (D) (50 x 211 x 22 mm)

Weight:

3.9 oz (110 g, including batteries)

For purposes of improvement, specifications and design are subject to change without notice.

Basic v

ersion

anced v

ersion

Inf
or

mation

Inf
or

mation