Panasonic AG-DVC20P User Manual

Before using

17

ª

If 2 cameras are used simultaneously, set the mode for one pair 
of camera-recorder and remote control to [VCR1] and that of 
the other pair to [VCR2]. This will prevent interference between 
the 2 pairs. (The default setting is [VCR1]. When the coin-type 
battery is replaced, the setting will revert to the default [VCR1].) 

D] and [∫] simultaneously. 1

E] and [∫] simultaneously. 2

ª

≥When the coin-type battery runs down, replace it with a new 

battery (part number: CR2025). The battery is normally 
expected to last about 1 year, but it depends on operation 
frequency.

≥Keep the coin-type battery out of the reach of children.

≥If the remote control mode of the camera and that of the 

remote control do not match with each other, “REMOTE” will 
appear. When the remote control is operated for the first time 
after the camera is turned on, “CHECK REMOTE MODE” 
(

) will appear and operation is impossible. Set the same 

remote control mode.

≥The remote control is intended for indoor operation. Outdoors 

or under strong light, the camera-recorder may not operate 
properly even within the usable ranges.

≥Within a 1 m (3 feet) range, you can operate the remote 

control from beside the remote control sensor (LCD monitor 
side) of the camera-recorder.

2

1

DVC20_Eng.book  17 ページ  ２００６年４月６日　木曜日　午前１０時１０分