Panasonic cf-27fccxxxx User Manual
2
CAUTION
CAUTION
Hold down the Fn key and press F2 to change the
brightness.
brightness.
By pressing this key combination, you can select ei-
ther an external display
ther an external display
*1
, LCD or simultaneous.
Rebooting the computer, or powering off then on,
restores the display setting of the Setup Utility.
restores the display setting of the Setup Utility.
Pressing this key combination turns on/off audio from
the internal speakers and headphone jack. Rebooting
the computer, or powering off then on, restores the
speaker setting of the Setup Utility.
the internal speakers and headphone jack. Rebooting
the computer, or powering off then on, restores the
speaker setting of the Setup Utility.
Pressing this key combination adjusts the volume of
the internal speakers and headphone jack.
the internal speakers and headphone jack.
This key combination cannot be used to ad-
just the volume of the warning beep.
A dull elongated sound may be heard while
adjusting the volume.
just the volume of the warning beep.
A dull elongated sound may be heard while
adjusting the volume.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. When the computer is pow-
ered on, by sliding the power switch, the saved
screen will be displayed. (The computer must be
plugged into the AC adapter or have a battery pack
with sufficient remaining power installed.)
screen on the display to be saved to memory, and
powers off the computer. When the computer is pow-
ered on, by sliding the power switch, the saved
screen will be displayed. (The computer must be
plugged into the AC adapter or have a battery pack
with sufficient remaining power installed.)
Pressing this key combination temporarily disables
the power management feature of the Setup Utility.
Rebooting the computer, or powering off then on,
restores the power management setting of the Setup
Utility.
the power management feature of the Setup Utility.
Rebooting the computer, or powering off then on,
restores the power management setting of the Setup
Utility.
Pressing this key combination displays the remain-
ing battery capacity on the screen.
ing battery capacity on the screen.
Pressing this key combination turns off the LCD and
hard disk drive until operation is resumed by press-
ing any key or mouse
hard disk drive until operation is resumed by press-
ing any key or mouse
*3
(
Windows 95
except the
keyboard and mouse connected to the USB port).
Key Combinations
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (touchscreen or mouse) or other keys.
Do not press the following key combinations while using the touch pad (touchscreen or mouse) or other keys.
LCD brightness con-
trol
trol
Display change
Speakers on/off switch
Volume control
( down)
( down)
Volume control ( up)
Holding down on the keys
changes the sound level.
changes the sound level.
Power off using the
suspend function
suspend function
Power management
enable/disable switch
enable/disable switch
Remaining capacity of
the battery pack
the battery pack
ECO mode for con-
serving power
serving power
Fn
+
F2
Fn
+
F3
Fn
+
F4
Fn
+
F5
Fn
+
F7
Fn
+
F8
Fn
+
F9
Fn
+
F10
Fn
+
F6
Is displayed when
the brightness is
at its maximum
value.
the brightness is
at its maximum
value.
Key
Functions
Popup Window
ON
OFF
Enable
(Standard)
(Standard)
Disable (OFF)
Up
Disabling the speakers will also disable the warn-
ing beep.
ing beep.
Remaining
capacity (%)
display
capacity (%)
display
Battery pack is
not installed.
not installed.
*
1
The optional port replicator or external display port adapter is required for use with an external display.
)
*
2
When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.
*
3
This "mouse" indicates the touch pad, the touchscreen and an external mouse.
*2
*2
Down
NOTE