Panasonic CF-18 User Manual
109
Dealing with Problems (Advanced)
When the previous item is not the
cause
cause
Press
F9 in the Setup Utility. This will restore the Setup Utility's settings to their
default values (except the password settings).
Try removing all peripheral devices.
Check a disk error using the following procedure.
Try removing all peripheral devices.
Check a disk error using the following procedure.
A
Display [Local Disk (C:) Properties].
Select [Local Disk(C:)] with the right button in [start] - [My Computer],
and select [Properties].
Select [Local Disk(C:)] with the right button in [start] - [My Computer],
and select [Properties].
B
Select [Tools] - [Check Now].
C
Select [Start] after selecting required items in [Check disk options].
At startup, hold down
F8 when [Panasonic] boot screen disappears
, and
release your finger when the Windows Advanced Options Menu is displayed.
Start the computer in Safe Mode, and confirm the details of the error.
Start the computer in Safe Mode, and confirm the details of the error.
*1
When [Password on boot] is set to [Enable], [Enter Password] appears after the
[Panasonic] boot screen disappears. Hold down
[Panasonic] boot screen disappears. Hold down
F8
a few moments after inputting the
password and pressing
Enter
.
Display
No display after powering on
When there is no display to an external display,
• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.
The display destination may be set to the external display.
Try changing the display destination by pressing
• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.
The display destination may be set to the external display.
Try changing the display destination by pressing
Fn+F3.
If you want to switch the display destination repeatedly by pressing
Fn+F3,
make sure that the display destination has switched completely each time
before pressing
before pressing
Fn+F3 again.
Press
Fn+F2 and adjust the brightness.
The power has not been turned off, but
after a certain period of time, there is
no display
after a certain period of time, there is
no display
Has the computer been set to the power-saving mode? To resume operation of
your computer from the condition the power of the display is off (for energy
conservation purposes), press any key unrelated to the direct triggering of a
selection, like
your computer from the condition the power of the display is off (for energy
conservation purposes), press any key unrelated to the direct triggering of a
selection, like
Ctrl.
To save power, your computer may have automatically entered the standby
mode (power indicator blinks green) or hibernation mode (power indicator turns
off). In such cases, slide the power switch.
mode (power indicator blinks green) or hibernation mode (power indicator turns
off). In such cases, slide the power switch.
Starting Up