Panasonic CF-18 User Manual
92
Setup Utility
*4
The display destination in cases where Windows is not running is set here. If an external display is
not connected, all information will appear on the internal LCD even if [External Monitor] or
[Simultaneous] is selected.
After Windows starts up, the screen is displayed on the display destination set in the following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics] - [Devices]
not connected, all information will appear on the internal LCD even if [External Monitor] or
[Simultaneous] is selected.
After Windows starts up, the screen is displayed on the display destination set in the following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics] - [Devices]
*1
Only for models with wireless LAN.
NOTE
[Advanced] menu cannot be changed when the Setup Utility is started up with the
User Password.
User Password.
Parameters
(Underline indicates settings at the time of factory shipment.)
Advanced Menu
Serial Port A:
[Auto]
Serial Port B:
[Auto]
Modem:
[Enable]
LAN:
[Enable]
Boot up from LAN:
[Enable]
Wireless LAN:
[Enable]
Legacy USB Support:
[Enable]
Serial Port A
Disable
Enable
Auto
Enable
Auto
I/O IRQ
3F8/IRQ4
2F8/IRQ3
3E8/IRQ7
2E8/IRQ5
2F8/IRQ3
3E8/IRQ7
2E8/IRQ5