Panasonic cf-72n3xxxxx User Manual
5
Wheel mode operations (almost identical
to the case of using the Microsoft
to the case of using the Microsoft
®
IntelliMouse
TM
for scroll, zoom, etc., op-
erations) are possible for Microsoft
®
wheel
function-compatible applications.
Microsoft
®
IntelliMouse
TM
is a mouse-type
device that, in addition to the two conven-
tional buttons, incorporates a wheel able
to rotate forwards/backwards.
tional buttons, incorporates a wheel able
to rotate forwards/backwards.
Using the Touch Pad
Use the touch pad to move the cursor on the display and perform normal computer
operations.
The touch pad has the following two modes of operation.
operations.
The touch pad has the following two modes of operation.
Scrolling Area
Microsoft
®
IntelliMouse
TM
Wheel Mode
(Setting at the time of purchase)
Only scroll operation is possible for appli-
cations not compatible with the Microsoft
cations not compatible with the Microsoft
®
wheel function.
Even for applications compatible with the
Microsoft
Microsoft
®
wheel function, there are cases
where only vertical scrolling or only hori-
zontal scrolling is possible in this mode.
zontal scrolling is possible in this mode.
Scrolling side-to-side
Possible when a check mark
Possible when a check mark
is
added for [Horizontal].
Scrolling up/down
: Typical mouse operations use this area.
When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and
[Vertical] of [Scroll Configuration], the entire surface can be used for typical
[Vertical] of [Scroll Configuration], the entire surface can be used for typical
mouse operations.
Scrolling Area
Scrolling up/down
Possible when a check
Possible when a check
mark
is added for
[Vertical].
For the Pan and Auto Scroll functions, the en-
tire work surface of the touch pad can be used
for scrolling.
tire work surface of the touch pad can be used
for scrolling.
Changing the mode of the touch pad
1
Select
from the task tray or select [Mouse] in [Start] - [Settings] - [Control Panel],
and then select [TouchPad].
2
To set the Microsoft
®
IntelliMouse
TM
Wheel mode
Add the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].
To set the original mode
Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration]
and add the check mark for [Horizontal] and/or [Vertical].
To set the original mode
Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration]
and add the check mark for [Horizontal] and/or [Vertical].
3
Press [OK].
NOTE
When you are not sure whether an application is compatible with the Microsoft
®
wheel function or not, try using both modes. Furthermore, depending on the appli-
cation, there are cases where scrolling may not be possible with either mode.
cation, there are cases where scrolling may not be possible with either mode.
Original Mode
Touch Pad
(Advanced)
Handling the Touch Pad
Do not place any object on the work surface or press down forcefully with sharp-
pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and
ball point pen).
Do not allow things that could dirty the touch pad, such as oil. The cursor may not
work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth
first applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene or thinner, or disinfectant-type alcohol.
pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and
ball point pen).
Do not allow things that could dirty the touch pad, such as oil. The cursor may not
work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth
first applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene or thinner, or disinfectant-type alcohol.
Left Button
Right Button
Work Surface