Panasonic cf-72n3xxxxx User Manual
3
LCD brightness con-
trol ( down)
LCD brightness con-
trol ( up)
trol ( down)
LCD brightness con-
trol ( up)
Display change
S p e a k e r s o n / o f f
switch
switch
Volume control
( down)
( down)
Volume control ( up)
Power off using the
standby function
standby function
Remaining capacity of
the battery pack
the battery pack
Power off using the
hibernation function
hibernation function
Fn + F9
Key
Functions
Popup Window
Key Combinations
CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
Fn + F3
Fn + F4
Fn + F5
Fn + F7
Fn + F6
CAUTION
Disabling the speakers will also disable the warn-
ing beep.
ing beep.
NOTE
This key combination cannot be used to adjust
the volume of the warning beep.
the volume of the warning beep.
Fn + F2
OFF
ON
Down
Up
R e m a i n i n g
capacity (%)
display
Battery pack is
not installed.
%
A
%
B
%
A
78
%
B
*
* When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, these key combinations become inoperable.
Fn + F10
*
Fn + F1
Pressing this key combination adjusts the brightness
of LCD. The brightness setting is stored in memory
separately under the condition the AC adaptor is
connected and under the condition the AC adaptor
is not connected.
By pressing this key combination, you can select ei-
ther an external display, LCD or simultaneous, even if
an external display is not connected. (
of LCD. The brightness setting is stored in memory
separately under the condition the AC adaptor is
connected and under the condition the AC adaptor
is not connected.
By pressing this key combination, you can select ei-
ther an external display, LCD or simultaneous, even if
an external display is not connected. (
The combination does not work in the following
cases:
• When either the internal LCD or external display is
cases:
• When either the internal LCD or external display is
set to [Secondary] in [Displays] of Display Proper-
ties.
ties.
•
Windows 98
When the computer is in the Dual-
Display mode.
Display mode.
Pressing this key combination turns on/off audio from
the internal speakers and headphone jack.
Rebooting the computer, or powering off then on,
restores the speaker setting of the Setup Utility.
the internal speakers and headphone jack.
Rebooting the computer, or powering off then on,
restores the speaker setting of the Setup Utility.
Pressing this key combination adjusts the volume
of the internal speakers and headphone jack.
of the internal speakers and headphone jack.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. (
screen on the display to be saved to memory, and
powers off the computer. (
Pressing this key combination displays the remain-
ing battery capacity on the screen. (
ing battery capacity on the screen. (
Pressing this key combination causes the current
screen on the display to be saved to the hard disk,
and powers off the computer. (
screen on the display to be saved to the hard disk,
and powers off the computer. (