Panasonic cf-45njxxxxx User Manual
20
1
CAUTION
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
hibernation mode; abnormal operation may result.
2
Connect the external display to your computer
Do not shut down using the suspend or hibernation mode.
Power off your computer
(
)
Run the Setup Utility
(
page 24)
Using and , select [Display], select the display with
, then press
Esc
Using and , select [System Setup], then press
Enter
Close the Setup Utility
(
page 24)
Turn on the display, then turn on your computer with the LCD
panel opened
panel opened
3
1
2
2
3
4
Ext. Display Port
Using an External Display
Select your external display
4
Set your external display for [Monitor] in [Start] - [Settings] - [Control Panel] - [Dis-
play] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play standards is connected, select
[Change] and make the monitor settings.
play] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play standards is connected, select
[Change] and make the monitor settings.
You can choose to select either an external display, or the LCD, or both with
Fn +
F3
.
In addition, you can set the display to use during start-up with the following procedure.
NOTE
For more detailed information, please refer to the operation manual of the external
display.
display.