Panasonic cf-45njxxxxx User Manual
21
1
CAUTION
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
hibernation mode; abnormal operation may result.
2
Connect the USB device to your computer
Do not shut down using the suspend or hibernation mode.
Power off your computer
(
)
NOTE
For more detailed information, please refer to the operation manual of the USB
device.
device.
Run the Setup Utility
(
page 24)
3
Using and , select [Supervisor Setup], then press
Enter
Using USB Devices
USB Connector
4
5
Using and , select [USB Controller], set [Enable] with
, then press
Enter
Using and , select [Power Management], then press
Enter
6
7
Using and , select [Power Saving], set [OFF]
Close the Setup Utility
(
page 24)
9
CAUTION
When using a USB device, do not use the suspend or hibernation function. In addition,
do not use the standby mode by pressing
do not use the standby mode by pressing
Fn + F10
.
If by accident the suspend, etc., function is used, the computer may act abnormally. In
this case, restart the computer by pressing the reset button.
You may need to install a driver for your USB devices. Simply follow the on-screen
instructions and refer to the operation manual for USB devices on how to install the
driver.
this case, restart the computer by pressing the reset button.
You may need to install a driver for your USB devices. Simply follow the on-screen
instructions and refer to the operation manual for USB devices on how to install the
driver.
8
Using and , select [Power Switch], set [ON-OFF] with
, then press
Esc