Panasonic CF-W8 User Manual

z

Shorten the distance between the computer and the access point, and try the detection again.

z

It may take some time before the access point is displayed in [Available Networks]. Wait for a moment.

z

Confirm the following settings:
• [Wireless LAN] in the [Advanced] menu of the Setup Utility

 

Confirm that [Wireless LAN] is set to [Enabled]. (

• Wireless device off:

 

Confirm that 

 / 

 / 

 is displayed on the notification area.

 

Confirm whether the Intel

®

 PROSet/Wireless Software is installed using the following menu. 

 

[start] - [Control Panel] - [Add or Remove Programs].

 

If it has not been installed, input [c:\util\drivers\wlan\WiFi\XP\x32\Install\install.bat] in [start] - [Run] to install.

• Wireless LAN power supply

 

If 

 is displayed on the notification area, slide the wireless switch to the right (ON).

• IEEE802.11a settings

 

Even if the wireless LAN is on, IEEE802.11a may be set to disable. If IEEE802.11a is to 
be used, change this setting to enable. (

)

z

This computer uses channels 1 through 11

 when using IEEE802.11b/g.  Check the chan-

nel being used by the access point.

*3

In the case of wireless communications, the frequency band being used can be divided into 
segments, so that different communications can be conducted on each band segment.  A “Channel” 
refers to the individual frequency bandwidth divisions.

CF-F8 Series

WIRELESS

CF-W8/CF-T8 Series