Panasonic dmr-hs2eb User Manual

[HDD] [RAM]

Preparation 
≥Before connecting any cables, first make sure that the power for 

both units is off.
Then after connecting any cable, turn on the both units.

≥Connect the DV equipment to the DV input terminal on the front 

panel.

≥Pause play of the DV equipment at the point you want recording 

to start.

≥Switch [DVD, TV] (15) to “DVD”.
≥Recording to the HDD:

Confirm there is sufficient empty space for recording on the 
HDD. (page 29)

Recording to the disc:

Insert a disc that can be written to.
- Check that disc can be recorded on (page 10).
- Ensure the write protect tab is not set to “PROTECT” 

(page 89).

- Ensure the disc is not write-protected with DISC 

INFORMATION (page 42).

(6) to select the recording 

(page 21)

(26) to select the recording 

≥Select “XP”, “SP”, “LP”, or “EP”.

(11)

3, 4, 2, 1] 

(10)

(10)

≥The DV equipment pauses automatically if it was playing.

2, 1] 

(10)

(10)

≥Recording starts.

To stop recording manually
Press [

∫] (7).

ªWhen recording stops

The following screen appears.

Press [ENTER] 

(10) to finish DV auto recording.

≥A programme and play list is added when DV auto recording 

finishes.

For your reference
≥Do not operate the DV equipment during recording, as this will 

cause recording to stop.
One recording session (from where recording is started to where 
it is stopped) is counted as one programme and a play list is 
automatically created. You can divide the recording into scenes 
by detecting the parts that the recording button of the DV 
equipment

 is pressed during recording of the DV equipment. The 

date of the first recording is used as the programme’s title.

≥The marker is automatically registered by detecting the parts that 

the recording button of the DV equipment is pressed during 
recording of the DV equipment.

≥Make sure the DV equipment is paused before starting recording.

If recording cannot start (the DV equipment is not connected 
correctly or a tape isn’t loaded) or cannot continue, the screen 
shows a warning message and cancels recording. Check the 
equipment carefully before trying to record from it.

≥The DV equipment name may not be shown correctly.
≥You cannot record and play simultaneously.
≥You cannot start recording until the images from the DV 

equipment appear on the television.

≥The audio recorded is the audio selected at “Audio Mode for DV 

Input” (page 77).

≥We recommend using Panasonic digital video camera.
≥Recording may not be performed as desired if the time codes on 

the tape in the DV equipment are not successive.

≥We recommend connecting one piece of DV equipment at a time.
≥Even if you use device equipped with DV Terminals, you may not 

be able to perform DV auto recording in some cases.

Note
≥You cannot control this unit from the digital video equipment even 

if using the DV cable.

≥This unit does not support recording the signal from a personal 

computer.

≥The DV input on this unit is for use with DV cameras only.
≥Select the TV system (PAL/NTSC) of the programme you wish to 

record (page 78).

(1)

(2)

*****

B.book  70 ページ  ２００２年８月７日 水曜日 午後８時７分