Panasonic dmr-hs2eb User Manual

Page of 98
71
Child Lock
The child lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit.
Remote control only
To activate the child lock
Hold down [ENTER] 
(10) and [RETURN] (23) simultaneously until “X HOLD” appears on the unit’s display.
≥If you press a button while the child lock is on, “X HOLD” appears on the unit’s display and operation is impossible.
To cancel the child lock
Hold down [ENTER] 
(10) and [RETURN] (23) simultaneously until “X HOLD” disappears.
≥If you cannot cancel the Child Lock, press [RETURN] (23) and then perform the operation.
Upgrading your system
First of all, please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting 
cables.
Enjoying more powerful sound
Refer to the relevant pages for details.
ªOther uses
Record to digital recording equipment or cassette deck ([A] [B] page 72)
Record from a video cassette recorder (page 74)
Use connection [B] to enjoy discs recorded with a sampling frequency of 96 kHz. Sound will not be output if you use connection [A] and set 
“PCM Down Conversion” to “No” due to copy protection. (Convert the signal to 48 kHz to enjoy this type of audio.)
For your reference
≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
Note
You can enjoy Dolby Digital in stereo with this unit alone. (This unit does not have a DTS decoder.)
Enjoying 5.1-channel 
surround sound with Dolby 
Digital and DTS
Digital connection
Connect to an amplifier with 
built-in decoders.
72
[A]
SET UP— Sound
≥Set “PCM Down Conversion” 
to “Yes”.
≥Set “Dolby Digital” and “DTS” 
to suit the equipment.
79
Change speaker settings on the 
amplifier.
To enjoy stereo or Dolby Pro 
Logic
Analog connection
Connect to an analog amplifier 
or system component.
72
[B]
SET UP— Sound
≥Set “PCM Down Conversion” 
to “No”.
79
Digital connection
Connect to a digital amplifier or 
system component.
72
[A]
SET UP— Sound
≥Set “PCM Down Conversion” 
to “Yes”.
≥Set “Dolby Digital” to “PCM”.
≥Set “DTS” to “Off”.
79
B.book  71 ページ  2002年8月7日 水曜日 午後8時7分