Panasonic dp-c354, dp-c264, dp-c323, dp-c263, dp-c213 User Manual
24
Chapter 2 Basic Fax Transmission
Transmission with Destination Monitoring
Select “Monitor” on the touch-panel screen to obtain a dial tone. This feature is called “on-hook
dialing.”
dialing.”
To monitor the status of a remote station, follow the steps below:
1
Place Original(s).
z
If the platen is used, only one page can be
transmitted at a time.
transmitted at a time.
z
Refer to Placing Originals (Facsimile/Internet
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Fax key.
3
Select “Monitor”.
The monitor screen appears, and you will hear
a dialing tone through the monitor speaker.
a dialing tone through the monitor speaker.
4
Enter the fax number of the
destination.
destination.
5
When you hear a beep, press the
Start key.
Start key.
The original(s) are stored into memory with a
file number. Then starts dialing the telephone
number.
file number. Then starts dialing the telephone
number.
z
For instructions on how to cancel a
transmission, refer to Canceling a
Communication (see page 48).
transmission, refer to Canceling a
Communication (see page 48).
z
Press Stop key to return the machine to the
initial screen of the current active mode.
initial screen of the current active mode.
Raises the monitor volume.
Lowers the monitor volume.
Select once to recall the
last dialed fax number.
Select twice to insert a
pause (dialing interval).
last dialed fax number.
Select twice to insert a
pause (dialing interval).