Panasonic KX-HCM280A User Manual
Installation/Troubleshooting
[For assistance, please call: 1-800-272-7033] 25
1.9
Connecting the Camera to a Router
Supporting UPnP™ (IPv4 Only)
Supporting UPnP™ (IPv4 Only)
To allow access from the Internet with a router supporting UPnP™, follow the
procedures shown on page 19.
procedures shown on page 19.
Note
•
In some routers, the UPnP™ feature is disabled by default. Enable your
router's UPnP™ feature following the router manual before you set up the
camera. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for details.
router's UPnP™ feature following the router manual before you set up the
camera. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for details.
•
If the maximum idle time is set in PPPoE or PPTP connection with your
ISP, disable it on the router. See the router manual for details.
ISP, disable it on the router. See the router manual for details.
kxhcm280ait.book 25 ページ ２００５年３月９日 水曜日 午後１時２３分